Creative SpO2 Modules Explained: Types, Differences and Compatibility Guide

Creative patient monitors may use different SpO2 sensor styles depending on the model and SpO2 module generation. This guide summarizes common Creative SpO2 sensor types, including legacy UP6000 / UP7000 sensors, Creative K10 / K12 / K15 sensors, and Creative PC900 Pro sensors.

If you are not sure which Creative SpO2 sensor is required, please send clear photos of the original sensor connector and the monitor SpO2 socket. Connector shape and pin arrangement are usually the safest way to confirm compatibility.

Common Creative SpO2 Sensor Types

Creative SpO2 Compatibility Summary

Creative model / module group Sensor type Reference product Confirmation note
UP6000 / UP7000 Old legacy Creative SpO2 sensor type Compatible Creative UP7000 SpO2 sensor Confirm by connector photo because older Creative interfaces may vary.
K10 / K12 / K15 Creative K-series SpO2 sensor Compatible Creative K10 K12 K15 SpO2 sensor Compare with original Creative sensor and cable connector before ordering.
PC900 Pro Creative PC900 Pro SpO2 sensor / cable Compatible Creative PC900 Pro SpO2 sensor Check whether the monitor uses this Oximax-style cable interface.

Ordering note

Please provide the Creative monitor model, the original SpO2 sensor photo, and the SpO2 connector photo before ordering if the module type is uncertain. This helps avoid choosing the wrong Creative SpO2 sensor or cable.

Technical support and product consultation: sales@panswmed.com

Creative is a trademark of its respective owner. The products listed on this page are compatible replacement accessories supplied by PANSW Medical and are not manufactured by the original equipment manufacturer.